| |
 |
Browse by Category |
 |
| | |
| |
 |
Browse by Brand |
 |
| | |
| |  | |  |
| | | | | Get Realtime Shipping Rates from UPS | |  |
| | | | Description | | | | | | | Green Air Products has designed a complete line of atmospheric controllers. We are certain one of them is right for you. They are designed to monitor temperature and humidity, and operate fans, air conditioning, humidifiers, dehumidifiers and misting systems etc. Our controls are mounted in brush finish anodized aluminum housings which provide superior resistance to corrosive humid atmospheres for years of dependable service. Illuminated switches and function indicator lights mounted in a black housing with an easy to read white dial face make our equipment an attractive addition to your system. Green Air Products atmospheric controllers are designed to easily plug into wall outlets or each other for easy installation. All controllers are fully assembled and ready to use and no hard wiring is required. Green Air Products uses only high quality UL listed components chosen to meet the specialized needs of a greenhouse or grow room climate. Most of our controllers are dual function and designed to work alone as an independent control or connect to other controls to simultaneously coordinate other functions.
The Cyclestat-4 is our most recent development in timing control. The Cyclestat-4 repeat cycle timer has solved the age old problem of accurate short cycle timing. Perfect for plant zone environments, reptile habitats or any other application requiring automatic short cycle switching. No programming required. Easy to set and operate. Microprocessor time counter with adjustable frequency and duration. The Cyclestat-4 timer has many uses. Only a few of them include: fogging or misting, spray stakes or drip system timing, air pumps, CO2 equipment and intake or exhaust fan control. The Cyclestat may be set for interval and cycle of timed events. Interval is the time between the "On" and "Off" cycles. The interval knob may be set from 7 minutes to 8 hours. Set this for desired time between functions. Cycle is the length of time that a specific function or condition must be maintained. Cycle may be set from 5 seconds to 30 minutes.
Automatic reset feature allows function synchronizing with other system controls. Turn the switch off and on again for manual operation. The Cyclestat-4 has a built-in photosensor to defeat timing during darkness hours. Photosensor may be switched in or out as desired. The Cyclestat timer utilizes a duplex cordcap which provides a combination plug and receptacle power cord design. Operates on 120 volts AC with 15 amp switching capacity.
COMBINATION POWER-CORD
All Control Stats utilize a duplex cord-cap which provides a combination plug and receptacle power cord design. Insert plug into 110V wall outlet and plug equipment into piggy back receptacle. | | | | 100% Lowest Price Guaranteed! - Click here to know more |
| | | | | | | | |
|
